2-channel 2000W Power Amplifier

Model: TG5

High-level touring performance
Rugged, lightweight package
2000W per channel (2-ohm)
Grounded bridge class-h design
Switch-mode power supply

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Documents

The TG-5 Tour Grade amplifier has a microprocessor controlled operation management system that provides useful features such as compound thermal management (preventing the unit from switching off in excessive thermal environment), automatic mains voltage detection and a circuit breaker control that allows the TG-5 to operate on a 30A (120V) or 16A (230V) circuit breaker with normal music signals.

High-level touring performance
Rugged, lightweight package
2000W per channel (2-ohm)
Grounded bridge class-h design
Switch-mode power supply
Microprocessor-controlled
Front lcd panel for operation-mode setup and monitoring
Slot for optional rcm-26 iris-net-compatible dsp and control module
11-level protection package

A/D Conversion: 24 Bit linear, Sigma-Delta, 128 times oversampling
Analog Inputs: Yes
D/A Conversion: 24 Bit, Sigma-Delta, 128 times over-sampling
Depth: 20.16 in
Digital Inputs: Optional with RCM-26
Height: 3.47 in
Impedance: 2/4/8 ohm
Sample Rate: 48 kHz
Total Harmonic Distortion: 0.05 %
Width: 19.02 in
Slew Rate: 30 V/us
Data Format: 24 Bit linear A/D and D/A conversion, 48 Bit processing
Input Sensitivity: 0/+6/+7 dBu
Input Impedance (Balanced): 20 k-ohm
Internal Processing: 2 DSPs (150MHz, 300MIPS)
Amplifier Gain: 39, 35, or 32 dB
Topology: Class-H grounded bridge
Control Protocol: CAN-Bus (with RCM 26 module)
DIM 30: 0.02 %
Intermodulation Distortion (SMPTE): 0.05 %
Product Weight: 31.31 lbs
Network Control (IRIS-Net): Optional with RCM-26
CAN Bus Interface: 10 - 500 kbaud, 2x RJ-45 (IRIS-Net Control)
FIR-Drive: Optional with RCM-26
Active Power: 1000 Watt
Minimum Frequency Response (Bandwidth): 10 Hz
Minimum Frequency Response (Bandwidth): 0.01 kHz
Maximum Frequency Response (Bandwidth): 30000 Hz
Maximum Frequency Response (Bandwidth): 30 kHz
Signal to Noise Ratio: 109 dB
Number of Channels: 2
Total Harmonic Distortion + Noise (THD+N): 1 %
Number of Watts Per Channel: 2000 Watt
GPIO Control Ports: 1 x 6-pole Euro block, 2 control inputs, 2 control outputs, (+5 V, 200 mA/GND)
Sample Rate Conversion (SRC): 32 kHz - 192 kHz, internal Sample-Rate- Converter
Operating Temperature (Maximum): 104 F
Operating Temperature (Minimum): 41 F
AC Voltage (Minimum): 100 Volts
AC Voltage (Maximum): 240 Volts
Continuous Rated Power (1 kHz, THD 1%) 2-ohm: 2000 Watts
Continuous Rated Power (1 kHz, THD 1%) 4-ohm: 1450 Watts
Continuous Rated Power (1 kHz, THD 1%) 8-ohm: 850 Watts
Continuous Rated Power (20-20 kHz, THD<0,2%) 4-ohm: 1200 Watts
Continuous Rated Power (20-20 kHz, THD<0,2%) 8-ohm: 600 Watts
Maximum Bridged Output 4-ohm: 3800 W
Maximum Bridged Output 8-ohm: 2900 Watts

Amplifier Type - Power Amplifier
Dante Enabled - Yes

Amplifier 504556 kb - Brochure

Project List

Amplifier 187645 kb - Data Sheet

Project List

Request Quote

8-channel 75W Power Amplifier

by Crestron Electronics, Inc.

2-channel 100W 70/100V Professional Modular Power Amplifier

by Crestron Electronics, Inc.

8-channel 150W/100V Commercial Power Amplifier with 4/8-ohm Impedance

by Crestron Electronics, Inc.

AV-iQ Terms and Conditions | | Powered by AV-iQ

2-channel 2000W Power Amplifier

Model: TG5

Suggested Products