The Crestron® CEN-IO-COM-202 is a compact and cost-effective wireless I/O extender designed to easily expand the available RS-232 ports within a commercial or residential system. A small form factor allows the CEN-IO-COM-202 to be placed just about anywhere, with the option to attach it to a flat surface or DIN rail using the included mounting bracket. The two onboard, bidirectional RS-232 COM ports enable direct integration with all kinds of third-party equipment. The CEN-IO-COM-202 communicates to the local network over Wi-Fi® wireless communications, allowing the connected equipment to be remotely controlled and monitored from a computer or tablet. Power is conveniently supplied to the CEN-IO-COM-202 via an included 5 VDC power pack.
WIRELESS COMMUNICATION :
•Transceiver: IEEE 802.11a/b/g/n Wi-Fi (2.4 or 5 GHz 2-way RF), static IP or dynamic IP via DHCP •Security: 64 and 128-bit WEP, WPA and WPA2-PSK with TKIP and AES •Range: Up to 50 ft (15 m), subject to site-specific conditions •Gateway: Requires an 802.11a/b/g/n wireless access point and Ethernet-enabled Crestron control system
•COM 1–2: (2) 5-pin 3.5 mm detachable terminal blocks; Bidirectional RS-232 port; Up to 115.2k baud, hardware and software handshaking support •USB: (1) Micro-USB Type B console port; For setup via Crestron Toolbox™ software •PWR: (1) 2-pin 3.5 mm detachable terminal block; 5 VDC power input for included power pack •G: (1) 4-40 screw; Chassis ground lug
Controls and Indicators :
•PWR: (1) Bicolor green/amber LED, indicates that power is present, amber indicates that the device is booting and not yet ready to operate, green indicates that device is ready to operate •ONLINE: (1) Green LED, indicates that the device is connected to a Crestron control system via Wi-Fi wireless communications •SETUP: (1) Red LED and (1) recessed pushbutton for web setup, LED indicates that the SETUP pushbutton has been pressed (times out automatically)
•Enclosure: IFE micro form factor, black and blue plastic •Mounting Freestanding, stackable, surface mount, or 35 mm DIN EN 60715 rail mount; Occupies 8 DIN module spaces (144 mm); Surface/DIN rail mounting bracket included, optional rack mount and pole kits sold separately