UMX Series TPS HDBaseT, Wallplate for VGA, HDMI, and DisplayPort. Offers CEC and advanced Event Manager control. 48v POE PD - Black

Series: UMX

Model: WP-UMX-TPS-TX130-Plus-US Black

Part #: 91540071

Can be remote powered through CATx cable (PoE PD)
Built-in Event Manager automation feature
Autoselect modes to automatically switch video and audio (first detect, last detect, priority)
Breakaway audio and video switching (audio and video signals can be routed separately)
Supports HDMI 3D signal formats (frame packing, side-by-side and top-bottom)

More Product Information Below

Compare

Project List

Product Info

Tech Specs

WP-UMX-TPS-TX130-Plus-US Black / White transmits universal 4K video with audio and control up to a range of 170 m over a single CAT cable. This transmitter was designed for digital and analog video and audio signals: VGA, YprPb, HDMI 1.4 and DP 1.1 with analog stereo audio from local input or embedded 7.1 HBR audio.

Can be remote powered through CATx cable (PoE PD)
Built-in Event Manager automation feature
Autoselect modes to automatically switch video and audio (first detect, last detect, priority)
Breakaway audio and video switching (audio and video signals can be routed separately)
Supports HDMI 3D signal formats (frame packing, side-by-side and top-bottom)
1920x1080 at 120Hz/4:4:4, 4096x2048 at 30Hz/4:4:4 or 60Hz/4:2:0 maximum resolutions (300MHz)
HDMI 1.4, HDCP 1.4 and DVI 1.0 compliant
HDCP enable/disable function on input
HDCP 1.4 compliant
Uncompressed video up to 9 Gbps datarate (300 MHz pixel clock)
No signal latency, zero frame delay
TPS link quality and cable length monitoring
DVI-I (Analog+Digital) input connection
Adjustable analog audio settings (volume, gain, balance)
Audio embedding (or replace original audio)
Firmware upgrade through Ethernet
Cross compatible with TPS series Lightware extenders and I/O boards (HDBaseT compatible)
Phoenix 2-pol DC power connector
Supports all embedded audio formats (including PCM, Dolby Digital and DTS high bitrate audio)
Extension distance up to 170 meters (with CAT7 S/FTP AWG23 cable, 1920x1080p60)
HDBaseT compatible
Ethernet extension (100 Mbps)
Advanced EDID Management
Digitizes VGA, YUV analog input formats and converts to HDMI or DVI
Pixel Accurate Reclocking
Command injection on RS-232 and IR ports
Device control via Ethernet (TCP/IP) and RS-232
Multiple TCP/IP connections
Intuitive control software for device configuration
Front panel buttons for crosspoint control
Supports HDMI 4K signal formats (4K UHD at 30Hz RGB 4:4:4 or at 60Hz YUV 4:2:0, up to 9 Gbps)
No video compression
Built-in video test pattern generator
Bi-directional RS-232 and IR extension (pass-through)
Extends VGA, DVI, HDMI 1.4 or DP 1.1 + Audio + Ethernet + RS-232 + IR over one CAT5/6/7 cable
Bi-directional RS-232 and IR extension (pass-through and control)
Frame Detector (analyze detailed video timings)
Supports several embedded audio formats (including PCM, Dolby Digital and DTS)
Compatible with Mac laptop and desktop computers with Thunderbolt port
3,5mm audio jack input
Active fan cooling

Warranty - Yes
HDBaseT - Yes

Depth: 2.85 in
Height: 4.50 in
Width: 4.56 in
DC Voltage: 48 Volts
Product Weight: 0.99 lbs
Active Power: 8.50 Watt
Warranty (Length/Type): 3 Year
Certifications: CE
Current Draw: 0.25 Amps